Work Better.
Cart 0
Creality CR-10S Dual Z Axis DIY 3D Printer Kit 300x300x400mm

Creality 3D

Creality CR-10S Dual Z Axis DIY 3D Printer Kit 300x300x400mm

$699.00 $790.00

  • Dual Z Axis
  • Filament Detector
  • Easy to Assemble (Half-assembled with 2 pre-assembled frames)
  • Large print area of 300 x 300 x 400mm
  • Resume print after power-off
  • Large-sized adjusted knobs for easy bed leveling in line with ergonomics.
  • Industrial-grade PCB can continuously print for about 200 hours (under ideal conditions)

Filament Runout Detection Sensor: This is a new feature that‘s found more often with Chinese 3D printers now. You run the 3D printed sensor between the spool and the hotend. If the filament runs out, the mechanical sensor picks up the information and pauses the print, so you can resume later. This is one of the major improvements of the Creality CR-10S 3D Printer.

External control board: As with Creality CR-10, the power brick, the RAMboard, and controls are located in a separate external “brick”. The spool holder is mounted on top. The heated bed now also uses a MOSFET for electrical safety.

Better Z-axis: The Creality CR-10S now offers a second rod for the z-axis, which will give you less wobble, resulting in more reliable build quality.

Auto-resume feature: In case of a power failure, the Creality CR-10S remembers where it left off and will resume printing when you start it up again.

Heated bed: The Creality CR-10s has a heated bed that lets you operate and experiment with a lot of materials.

Connections: Connection-wise the Creality CR-10s only offers Micro-SD card slot, but no USB for hooking up your computer.

Removable glass bed: The bed can easily be removed to pluck the print off the bed. Also, Creality throws in a spool of Kapton tape if you don’t want to print on the bed directly.

Improved build quality: In comparison to the Creality CR-10, the quality of the parts has been ramped up in the Creality CR-10S. Instead of using 3D printed components, the frame uses injection-molded parts and aluminum rods. The rest of the mechanical parts are identical to the Creality CR-10 and Creality CR-10 Mini.

Modeling Technology: FFF FDM (Fused Deposition Modeling)
Printing Size: 300mm x 300mm x 400mm

Machine Size: 615mm x 600mm x 490 mm
Max Print Speed: 80mm/s - 200mm/s
Filament: 1.75mm PLA / ABS / TPU / Copper / Wood / Carbon Fiber / Gradient
Max heated bed temperature: 90 °C
Input: AC 100-220V 50-60Hz
Output: DC 24V 480W
Layer Resolution: 100 - 300 Microns
Nozzle diameter: 0.4mm
Precision: ±0.1mm
File Format: STL,OBJ,G-Code
Resume print after power off: Yes

Optional to add-on Raspberry Pi 3b+ with a Camera Module and Octoprint for remote printing.
3D Printing Filaments can be found here

This item is currently restocking. It will take up to 3 weeks to ship.

Share this Product

More from this Category