- Made in Japan
- Colour Red
- Model 55262-812
- Diameter Size
- Vacuum Sealed High Grade PLA filament 3.00 mm 1KG Spool
- Filament Length of 119m
- Diameter Tolerance 2.90 +/- 0.05 mm
- Nozzle Temperature 200 - 220 °C
- Heated bed temperature of 60 °C
- High performance Polyactic Acid (PLA) for material extrusion
- Biopolymer derived from plants
- Good post-printing workability
PLEASE NOTE: This is 3.00mm diameter filament. This size will not fit for Creality and some other models, kindly view below for printer compatibility for reference. (Also see: Other Verbatim compatible list).
Verbatim 3D Printing Filament PLA
Top grade 3D printing filament, manufactured to very tight tolerances. Made from the highest quality materials to ensure consistent feeding and stable prints
PLA (Polylactic Acid) filament is a degradable bioplastic derived from plants.
Guaranteed not to have heavy metals, phthalates or BPA.
All filament is delivered in a vacuum bag, with desiccant, wound onto a spool.
Heated build platform not required
Process temperature: 200-220 °C (recommended)
Keep material sealed until ready for use
Store unused material in the provided re-sealable bag in a cool dark place
Once you’ve purchased your filament it’s important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend.
To maintain our product quality we recommend to remove the filament from your printer if not used for more than a few hours and store it in a dry place
Recommended Printer Setup
Extrusion temperature: 200-220 °C