Bambu Lab X1-Carbon 3D Printer
- Product Dimensions: 389 x 389 x 457 mm / 389 x 389 x 857 mm with AMS
- Dual Auto Bed Leveling
- 7 μm Lidar Resolution
- CoreXY 20 m/s Acceleration
What's in the box
Bambu Lab X1-Carbon
Bambu Lab AMS
Build Plate(Pre-installed, Random)
Bambu Filament Samples (Random Color/Type, Contains 3 spools)
Accessories Box
X1C and X1C combo accessories in the box
| NO. | Physical photos | Descriptions | Applications | Marks |
| 1 |
 |
Bambu build plate | Placed on the heat bed to hold the model. | Build Plate(Pre-installed、Random) |
| 2 |
 |
Hotend with hardened steel nozzle (0.4 mm) | X1C spare hotend, replace the original nozzle when it is damaged. | |
| 3 |
 |
Bambu bus cable (4PIN) | The communication cable connecting the printer and the AMS buffer | For the X1C combo only |
| 4 |
 |
Bambu bus cable (6PIN) | Communication cable connecting the AMS and the AMS buffer | For the X1C combo only |
| 5 |
 |
Filament cutter | Spare cutter for replacement | For the X1C combo only |
| 6 |
 |
Retaining clip & hot end srcews | Spare retaining clip and hot end retaining screws, which may be needed when replacing the hot end, the ceramic heater, or the thermistor. | |
| 7 |
 |
H1.5/H2.0 hex keys | Disassembly and assembly tools | |
| 8 |
 |
Lubricant grease | Special grease for lead screw | |
| 9 |
 |
Bambu scraper | Print 'Scraper grip' from the built-in files， and then install the scraper to it. | |
| 10 |
 |
Spool holder | It is installed on the back of the printer, fixed with 2 screws. | |
| 11 |
 |
Spare screws for the extruder | Spare screws for extruder | |
| 12 |
 |
Uncloged tool for 0.4 mm nozzle | Special uncloged tool for the 0.4 mm hot end | The hot end has been separated from the extruder and is heated. |
| 13 |
 |
Thermal grease |
Improve the thermal conductivity of the thermistor、ceramic heater with the nozzle, which may be used when replacing the above accessories. |
|
| 14 |
 |
Nozzle wiper | Spare nozzle wiper, replace it when the wiper is damaged. | |
| 15 |
 |
3M VHB double-side tape | Use when reattaching the auxiliary part cooling fan, or when adding this fan to the X1. |
